Monthly Archives: July 2015

OpenWrt 15.05 on Legacy Devices (16Mb RAM)

There are 86 devices on the OpenWrt homepage listed as supported, but with only 16Mb of RAM. Those devices work just fine with OpenWrt Backfire 10.03.1, but not with more recent OpenWrt releases.

I myself own a Linksys WRT54GL and I used Barrier Breaker 14.07 with some success.

With 15.05 there is a new feature available: zram-swap. A bit simplified, it means the system can compress its memory, effectively making better use of it.

I decided to try out 15.05 RC3 on my WRT54GL.

The standard image
The standard image is 3936256 and the device page for WRT54GL says: As the WRT54GL has only 4Mb flash, any image sent to the device must be 3866624 bytes or smaller. So the standard image is out of the question. Instead I downloaded the Image Builder from the same folder.

The Image Builder
The Image Builder is very easy to use and requires an x64 linux computer.

make image PROFILE=Broadcom-b43 PACKAGES="zram-swap -kmod-ppp -kmod-pppox -kmod-pppoe -ppp -ppp-mod-pppoe -kmod-b43 -kmod-b43legacy -kmod-mac80211 -kmod-cfg80211"

After a little while this has produced custom images, minus ppp-stuff, minus wireless stuff (more on that later), plus zram-swap. Also, LuCi is not there. The image is found in bin/brcm47xx, it is 3012kb and is installed the normal way on your WRT54GL.

Trying 15.05
Logging in via ssh (dropbear) is fine:

BusyBox v1.23.2 (2015-06-18 17:05:04 CEST) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 CHAOS CALMER (15.05-rc3, r46163)
 -----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
 -----------------------------------------------------
root@OpenWrt:~# 

Top looks tight but not alarming (as usual):

Mem: 11568K used, 1056K free, 44K shrd, 1208K buff, 3228K cached
CPU:   8% usr   8% sys   0% nic  83% idle   0% io   0% irq   0% sirq
Load average: 0.13 0.23 0.11 1/31 1061
  PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
 1061  1056 root     R     1488  12%  17% top
  631     1 root     S     1656  13%   0% /sbin/netifd
  848     1 root     S     1492  12%   0% /usr/sbin/ntpd -n -S /usr/sbin/ntpd-h
 1056  1055 root     S     1492  12%   0% -ash
  735   631 root     S     1488  12%   0% udhcpc -p /var/run/udhcpc-eth0.2.pid
    1     0 root     S     1444  11%   0% /sbin/procd
 1055   757 root     S     1224  10%   0% /usr/sbin/dropbear -F -P /var/run/dro
  650     1 root     S     1196   9%   0% /usr/sbin/odhcpd
  757     1 root     S     1156   9%   0% /usr/sbin/dropbear -F -P /var/run/dro
  580     1 root     S     1060   8%   0% /sbin/logd -S 16
  868     1 nobody   S      996   8%   0% /usr/sbin/dnsmasq -C /var/etc/dnsmasq
  308     1 root     S      916   7%   0% /sbin/ubusd
  737   631 root     S      812   6%   0% odhcp6c -s /lib/netifd/dhcpv6.script
  337     1 root     S      772   6%   0% /sbin/askfirst /bin/ash --login
    4     2 root     SW       0   0%   0% [kworker/0:0]
    8     2 root     SW       0   0%   0% [kworker/u2:1]
    3     2 root     SW       0   0%   0% [ksoftirqd/0]
   14     2 root     SW       0   0%   0% [kswapd0]
    6     2 root     SW       0   0%   0% [kworker/u2:0]
  237     2 root     SWN      0   0%   0% [jffs2_gcd_mtd5]

The swap seems to work, at least in theory:

root@OpenWrt:~# free
             total         used         free       shared      buffers
Mem:         12624        11552         1072           44         1208
-/+ buffers:              10344         2280
Swap:         6140           72         6068

But that is the end of the good news.

opkg runs out of memory
Trying to install a package fails (in a new way):

# opkg install kmod-b43
Installing kmod-b43 (3.18.17+2015-03-09-3) to root...
Downloading http://downloads.openwrt.org/chaos_calmer/15.05-rc3/brcm47xx/legacy/packages/base/kmod-b43_3.18.17+2015-03-09-3_brcm47xx.ipk.
Collected errors:
 * gz_open: fork: Cannot allocate memory.
 * opkg_install_pkg: Failed to unpack control files from /tmp/opkg-lE7SIf/kmod-b43_3.18.17+2015-03-09-3_brcm47xx.ipk.
 * opkg_install_cmd: Cannot install package kmod-b43.

This happens also without zram-swap installed. I tried different packages but none of those I tried installed successfully. Effectively opkg is broken. One way to deal with this is to build an image with exactly the packages I need, and rebuild the image every time I want a new package. Which leads me to the next problem.

sysupgrade runs out of memory
I have found that flashing my 15.05 image to my WRT54GL (from 10.03.1 or 14.07) is fine. But flashing from 15.05 is tricky because it seems there is not enough RAM for sysupgrade. And it is quite scary when sysupgrade stalls, because you dont know if it is in the middle of flashing but failing to let you know.

One way to get around this is to flash a smaller image that use less space on /tmp. I tried 8.09.1 for the first time ever for this reason. Another (not recommended way) is to pipe from nc to mtd directly.

I found out (the hard way) about system recovery mode: start your WRT54GL, press the reset button on the back side (more is better), and it starts in recovery mode where you can telnet to it and sysupgrade runs just fine.

Not even in recovery mode everything is fine: for example, when trying the firstboot command it did not finish properly and I had to reset the WRT54GL.

A few times I forgot to use the -n option with sysupgrade: that is not such a good thing when you run it in recovery mode and perhaps flash a different firmware version.

testing wifi
I built a new image with WiFi installed and flashed it from failsafe mode:

make image PROFILE=Broadcom-b43 PACKAGES="zram-swap -kmod-ppp -kmod-pppox -kmod-pppoe -ppp -ppp-mod-pppoe"

Well, I tried different things… on one occation I had WiFi without encryption working. However, most of the time, activating WiFi just makes the WRT54GL not responding or very slow.

Conclusion
zram-swap is not the silver bullet that makes OpenWrt run on 16Mb devices. As with 14.07, you can probably use Image Builder to build a useful minimal image: get rid of the firewall, the WiFi, LuCl of course, and use it for something else – fine! But as a WiFi router: use Tomato or 10.03.1 instead.

For now, my WRT54GL is flashed with 10.03.1, completely unconfigured, and stored away for future adventures. At least it is not bricked, and I never needed to connect a TTL-cable to it.